OHAUS Carat Serie Manuel D'instruction page 25

All manuals and user guides at all-guides.com
SPJ
Error Codes List
When internal and some external problems occur with the balance, the internal software
will display messages as error codes. Explanations are given for possible problems.
Try remedies in order indicated.
Error Codes
Err 1 chEct Invalid checksum data
Err 2 LoAd Overload (>cap+90d) or Underload
Err 4 WEIght Incorrect calibration weight
Err 5 999999 Displayed value >99999
Err 6 count Parts counting error - balance exits parts counting
Err 8 FULL RS232 buffer is full
Err 9 dAtA Internal data error. The next button press or a 5 second time-out
causes the balance to turn off.
a) Cycle balance ON/OFF,
b) Return balance for servicing.
a) Remove load,
b) Check shipping lock,
c) Recalibrate.
a) Use correct calibration weights,
b) Check environmental conditions.
a) Exit application,
b) Rezero balance.
a) Exit application,
b) Rezero balance.
a) Cycle ON/OFF,
b) Check RS-232 settings in balance and computer.
a) Cycle ON/OFF,
b) Return balance for servicing.
EN-21