Télécharger Imprimer la page

Impecca FANFAIR FDF-1212 Manuel De L'utilisateur page 5

Ventilateur de bureau

Publicité

Les langues disponibles

Les langues disponibles

To turn on the oscillation feature, push down the clutch knob on the top of the motor hous-
ing. To turn off the oscillation feature, pull the clutch knob up.
To change the angle at which the fan blows, release the Fan Pitch Adjustment (11), adjust the
fan as desired, and re-tighten it.
IMPORTANT: Always switch off the fan and unplug it when not in use.
CLEANING AND STORAGE
• Turn the unit OFF and unplug the unit before cleaning.
• Use only a soft, damp cloth to clean the exterior. A can of compressed air or a vacuum cleaner can be used
to clean the inside of the motor.
• Do not immerse the unit in water and never allow water to drip into the motor housing.
• Do not use gasoline, paint thinner or other chemicals to clean the fan.
• Store the unit in the original box and store in a cool, dry place.
NOTE: If you experience a problem, please return the unit to the place of the original purchase or see your war-
ranty. Do not attempt to open the motor housing yourself. Doing so may void your warranty and cause damage
to the fan or personal injury.
SPECIFICATIONS
Voltage: 120V
Rated Frequency: 60Hz
Rated Power: 35W
Speed Settings: Low (1), Medium, (2) High (3)
Power Cord: 5 feet long
CUSTOMER SUPPORT
Before contacting customer support, please see the troubleshooting guide above.
Visit our website to contact us, find answers to Frequently Asked Questions, and for other resources which may
include an updated version of this user's guide.
If you wish to contact us by phone, please be sure to have your model number and serial number ready and call
us between 9:00am and 6:00pm ET, at +1 866-954-4440.
Keep tabs on Impecca's newest innovations & enter contests via our social network feeds:
© 2017 Impecca, a division of LT Inc., Wilkes Barre, PA.
WWW.IMPECCA.COM
www.facebook.com/Impecca/
www.instagram.com/impecca/
@impeccausa
5

Publicité

loading