Télécharger Imprimer la page

TJD XGen 99XA-042 Guide D'installation page 9

Publicité

AJUSTEMENT DES AMORTISSEURS AVANT
Si votre véhicule est équipé d'une suspension avec amortisseurs
ajustables, il est recommandé d'ajuster les amortisseurs à leur point
le plus élevé, tel qu'indiqué dans le guide du propriétaire fourni
par le manufacturier du véhicule.
PLAQUES DE FIXATION AVANT / FRONT FIXATION PLATES
00PF-286 (G => Côté Gauche / Left Side || D => Côté Droit / Right Side)
Pour installer les plaques de fixation il se pourrait que vous ayez à
retirer la protection fixée aux triangles de stabilisation. Consultez
l'annexe des 00PF-286 afin de repérer les pièces nécessaires à la
fixation des plaques, puis boulonnez les plaques en place.
TIGE STABILISATRICE AVANT / FRONT STABILIZATION RODE
03TS-015
S.V.P., consultez l'annexe inclus avec le 03TS-015 afin de
procéder à son installation.
INSTALLATION DES ADAPTATEURS DE
MOYEUX AVANT
12/02/2014
Ver. 1e
FRONT SUSPENSION ADJUSTMENT
If your vehicle is equipped with an adjustable suspension, it is
recommended that the shock absorbers be adjusted to their highest
level as per the instructions supplied by the vehicle's
manufacturer in the owner's manual.
In order to install the fixation plates, it may be necessary to remove
the protection attached to the stabilization a-arm. Refer to
Appendix 00PF-286 to identify the parts needed to attach the
fixation plates. Then screw the plates in place.
Please, refer to the Appendix included with 03TS-015 for proper
installation.
INSTALLATION OF THE
FRONT HUB ADAPTER
Les Fabrications TJD inc. 2012
9 / 17

Publicité

loading

Ce manuel est également adapté pour:

Xtrack 99xb-071