Publicité
I.
Ensure that all parts and hardware are available before beginning assembly.
II.
Follow each step carefully to ensure the proper assembly of this product.
III.
Two people are recommended for ease in the assembly of this product.
IV.
The three main types of hardware used to assemble this product are: wood
dowels, screws and bolts.
V.
The provided glue is to secure wood dowels in place. When first inserting dowels,
locate the appropriate hole for the dowel, place a small amount of glue in the hole
and insert the dowel. Wipe away excess glue immediately.
In future assembly steps when dowels are necessary to attach assembly parts
together, place a small amount of glue on the end of the dowel before attaching
parts together. Wipe away excess glue immediately.
VI.
A Phillips head screwdriver is required for the assembly of this product.
VII.
Power tools should not be used to assemble this product.
VIII.
Drill may be needed for securing product to wall.
Ⅸ.
Concealed hinges are three-way adjustable.
Horizontal
by screw adjustment
Copyright
General Assembly Guidelines
1
2
In-and-Out
by loosening the hinge-arm
mounting screw or via cam
adjustment
©
2021 by Walker Edison Furniture Co., LLC. All rights reserved.
Vertical
Via slots in the mounting
plate or via cam adjustment
(EN)
P.2
Publicité
