Romus LP 650 MASSICOT Mode D'emploi page 11

All manuals and user guides at all-guides.com
LP 650 GUILLOTINE
REF. 93650
Mode d'emploi
Diagonal Cut
Position the guide bar at 45°. Insert a
carpet tile between the cutting blade
and the base, along with the guide
bar as shown, then pull the handle
down to complete a cut.
45° Cut
Position the guide bar at 45°. Insert
the floor plank between the cutting
blade and the base, along with the
guide bar as shown, then pull the
handle down to complete a cut.
Lengthwise Cut
Insert the floor plank between the
cutting blade and the working table
along with the guide bar which can be
locked on both sides of the working
table. Keep moving the plank along
with the guide bar after each cut until
the complete plank is cut.