djive VACUMATE Ultralight Mode D'emploi page 9

PRIOR TO FIRST USE \\\
Charging the Vacuum
ATTENTION –
to the electrical outlet for the charging process.
The vacuum is partially pre-charged and will run for a short time.
We recommend fully charging the vacuum before use.
1. Set the vacuum onto the Storage/
Charging Station, ensuring the
connection between the points
The vacuum is partially charged and will
on the vacuum with the Storage /
run for a short time. We recommend fully
Charging Station (Fig. 1).
2. Plug the battery charger into the
Storage/Charging Station and into an
electrical outlet (Fig. 2). The indicator
light on the vacuum will blink red
while the battery is charging. When
the indicator light is green, the battery
is fully charged (Fig. 3). Charging time
is approximately 3 hours.
Unplug the battery charger when the
3. Remove the vacuum from the Sto-
rage/Charging Station and begin
vacuuming.
4. Unplug the battery charger when the
vacuum is in use.
5. Always return the vacuum to the
Storage/Charging Station when
not in use.
The battery charger must be connected
Fig. 1
Fig. 2
Fig. 3
9