Publicité
Liens rapides
© 2013, Moog Videolarm, Inc. All Rights Reserved
S M 5 C 8 N a n d S M 5 C F 8 N
PoE Ready™ Compact Vandal-Resistant Surface Mount Dome-5"
Installation and Operation Instructions for the following models:
SM5C8N
Outdoor 5" PoE surface mount housing for small PTZ camera, conduit input from the
(SM5T8N)
side and top of the housing, 30W PoE input, with heater and Dynamic Power Allocation™.
Polycarbonate body and clear/tinted dome. IP66, 1" NPT threads for pendant mount.
SM5CF8N
Outdoor 5" PoE surface mount housing for small fixed camera, conduit input from the side and the
(SM5TF8N)
top of the housing, 30W PoE input, with heater and Dynamic Power Allocation. Polycarbonate body
and clear/tinted dome. IP66, 1" NPT threads for pendant mount.
SM5CF8NE Outdoor 5" PoE surface mount housing for small fixed camera, conduit input from the
(SM5TF8NE) side and the top of the housing 30W PoE input, with heater and Dynamic Power Allocation.
Polycarbonate body and clear/tinted dome. IP66, 1" NPT threads for pendant mount.
(no midspan included)
SM5C8NE
Outdoor 5" PoE surface mount housing for small PTZ camera, conduit input from the side
(SM5T8NE) and the top of the housing 30W PoE input, with heater and Dynamic Power Allocation.
Polycarbonate body and clear/tinted dome. IP66, 1" NPT threads for pendant mount.
(no midspan included)
Before attempting to connect or operate this product, please read these instructions completely.
www.moogvideolarm.com
81-IN5460
01-10-2013
Publicité
Manuels Connexes pour Moog Videolarm SM5CF8N
Sommaire des Matières pour Moog Videolarm SM5CF8N
- Page 1 © 2013, Moog Videolarm, Inc. All Rights Reserved S M 5 C 8 N a n d S M 5 C F 8 N PoE Ready™ Compact Vandal-Resistant Surface Mount Dome-5” www.moogvideolarm.com Installation and Operation Instructions for the following models: SM5C8N Outdoor 5” PoE surface mount housing for small PTZ camera, conduit input from the...
- Page 2 IMPORTANT SAFEGUARDS SAFETY PRECAUTIONS Read these instructions. Keep these instructions. CAUTION Heed all warnings RISK OF ELECTRIC SHOCK DO NOT OPEN Follow all instructions. Do not use this apparatus near water. CAUTION: TO REDUCE THE RISK OF Clean only with damp cloth. ELECTRIC SHOCK, DO NOT REMOVE COVER ( OR BACK).
- Page 3 If Purchaser believes that the Product is defective in material or workmanship, then written notice with an explanation of the claim shall be given promptly by Purchaser to Moog Videolarm. All claims for warranty service must be made within the warranty period.
- Page 4 Electrical Specifications Contents of Box Power POE 56V SM5C8N SM5CF8N Input Power: 100 to 240VAC (Midspan) Power: 0.8A Frequency: 50 to 60 HZ output Camera: POE (55VDC) Heater: 56VDC (max. 20W) English (1) Mounting Plate Energía de entrada: 100 a 240VAC (Midspan) Energía: 0.8A...
- Page 5 For Surface Mounting Using Side Conduit Entrance PACKETS (1) Mounting Plate (1) 1/4 x 20 Bolt (1) 1/4 Flat Washer (1) 1/4 Lock Washer (4) M3 6mm Bolt (4) M3 Lock Washers (7) 8 x 32 x 3/8" bolts (2) 8 x 32 Nuts (2) 94-FSCT01 Fixed Etch knockout slightly with utility knife.
- Page 6 For Surface Mounting Using Side Conduit Entrance Continued For Surface Mount Applications WARNING: Ensure drill is level to avoid damage to the circuit board Mount securely to ceiling or mounting Drill out (3) mounting holes as shown for # 10 surface using the appropriate hardware hardware (not supplied) •...
- Page 7 For Pendant Or Wall Mount Applications For Pendant Or Wall Mount Applications Seal pipe threads with teflon tape supplied Thread housing to optional pendent pipe with outdoor housings. or wall mount bracket • Hilos de rosca de pipa del sello con la cinta del Teflon •...
- Page 8 Arecont AV1315 / AV2815 / AV2805 / AV10005 Camera REMOVE Remove center section from fixed camera bracket. Attach to mounting plate with hardware provided. Secure and complete wiring connections. • Quite la sección de centro del soporte fijo de la cámara. Ate a la pletina con el hardware proporcionado. Asegure y termine las conexiones del cableado.
- Page 9 Axis 212 PTZ Camera ½" 2" Remove center section from fixed camera bracket. Attach to mounting plate with hardware provided. Secure and complete wiring connections. • Quite la sección de centro del soporte fijo de la cámara. Ate a la pletina con el hardware proporcionado. Asegure y termine las conexiones del cableado.
- Page 10 Panasonic BB-HCM381 / KX-HCM280A Camera Use this hole ½" pattern Secure camera quick release Install (4) .5” spacers to Tighten hardware and plate to mounting plate with center bosses. complete wiring. #8 hardware provided. • Placa segura del lanzamiento rápido de la •...
- Page 11 Panasonic WV-NF284 / WV-NF302 Camera 1" Secure camera quick release Install (4) 1” spacer to Secure camera safety screw. mounting plate with #8 center bosses. hardware provided. • Pletina segura del lanzamiento rápido de la • Instale (4) 1” espaciador para centrar los •...
- Page 12 Toshiba IKWB21A Camera ½" 1" Secure camera quick release Tighten hardware and 1” spacers + (4) .5” spacers mounting plate with ¼” hardware complete wiring. (4) corner bosses. provided. • 1” espaciadores + (4) jefes de la esquina de • Pletina segura del lanzamiento rápido de la cámara •...
- Page 13 Press the Calibration button for one second. Both the Test and Heat LED will turn ON. Once the unit has been Reset successfully calibrated, the Test and Heat LED will turn OFF. Once this is complete the Heat LED will turn ON only if the heater is ON.
- Page 14 Install security screw, if desired Attach lanyard loop to hook • Instale el tornillo de la seguridad, si está deseado • Ate el lazo del acollador al gancho • Installez la vis de sécurité, si désiré • Attachez la boucle de lanière au crochet •...
- Page 15 Replacement Parts List Item Part Comments Number Number Replace Trim Ring Assembly RP0SM5TR Dome and Gasket RPDC5 RP40VL3586 SM5 Housing RP95FSP01 1” NPT Plug Blower RPBACH8N RP762010 POE SM5 PCB Heater for POE Housing RPHACH8N RPVL3790 Heater Bracket RP70VL9001G 30Watt Midspan...
- Page 16 Product Registration/Warranty Thank you for choosing Moog Videolarm. We value your patronage and are solely committed to providing you with the highest quality products available and superior customer service. Should a problem arise, rest assured that Moog Videolarm stands behind its products by offering impressive 3 Year and 5 Year warranties, depending on the product purchased. See full warranty details at www.moogvideolarm.com/technical-support/warranty-plan/ Register Your Products Online Please take a few moments to register your purchase via the Online Product Registration Form at: www.moogvideolarm.com/technical-support/product-registration Register your recent Moog Videolarm purchase and benefit from the following: • Simple and Trouble-Free RMA process • Receive product updates, and special promotion • Eliminate the need to archive original purchase documents: Receipts, Purchase Orders, etc…...