Publicité
Les langues disponibles
Les langues disponibles
ASSEMBLY INSTRUCTIONS
Step 1: Determine position light will hang and mark
locations on ceiling so mounting chains hang straight.
Try to hit a ceiling joist. If not, use Bracket as
template, mark and drill holes for Plastic Anchors.
Step 3: Screw Mounting Cap onto Bracket pipe
extension until flush with ceiling.
Step 5: Screw Mounting Cap Bolt into pipe extension.
* May require a licensed electrician. Make sure all local electrical codes are followed.
Step 2: One Bracket will screw to the ceiling. *Note:
at least one Bracket will mount to an existing or
installed electrical box to provide power. Please
consider this when selecting location.
Step 4: Insert the Mounting Cap Bolt through
Mounting Cap.
Step 6: Attach lamp shades using rings as shown below.
Step 7: Screw End Caps onto ends of lamp and use chains to hang
light fixture level. Note: links can be removed to adjust desired height.
5
Publicité
