Hathaway Brookline NG5004 Instructions D'assemblage page 4

ASSEMBLY INSTRUCTIONS
1.
#7
2.
NOTE: Two methods for mounting the dartboard are shown, but only one will be used. A wall with studs
is the most common type of wall to mount the dartboard to.You can 1. Mount and hang the cabinet from
hanging plates, OR 2. Use four screws to mount cabinet directly to wall. Choose a location that is near an
electrical outlet (if using power adapter) and has at least 10 feet of open floor space in front of the board.
Use a wall stud for mounting whenever possible. If you can't hit the stud, you must use wall anchors.
wall
4