Télécharger Imprimer la page

Publicité

Liens rapides

Tiltable wallmount for
horizontal mounting bar
Kantelbare muurbeugel voor
horizontale montagebalk
Installation manual
Montage handleiding
FLEX-1840
© Audipack

Publicité

loading

Sommaire des Matières pour Audipack FLEX-1840

  • Page 1 Tiltable wallmount for horizontal mounting bar Kantelbare muurbeugel voor horizontale montagebalk Installation manual Montage handleiding FLEX-1840 © Audipack...
  • Page 2 Mount the bracket to the desired wall using the provided mounting holes. (Fastening materials not included) Monteer de beugel tegen een gewenste wand. (Bevestiging materiaal niet inbegrepen)
  • Page 3 Place the horizontal mounting bar. Plaats horizontale montage balk. Place the strips as shown. Plaats de strippen als aangegeven.
  • Page 4 Place the horizontal mounting bar. Plaats horizontale montage balk. Place the horizontal mounting bar with strips as shown. Plaats de horizontale montage balk met strippen als aangegeven.
  • Page 5 Place bolts, spring washers and washers on underside as shown. Do not fully tighten. Plaats bouten sluitringen en veer ringen als aangegeven. Draai nog niet helemaal vast.
  • Page 6 Place bolts washers and spring washers as shown. Note; 3 positions possible, 0 degrees tilt, 5 degrees tilt and 10 degrees tilt. After choosing desired position tighten all bolts! Plaats bouten sluitringen en veer ringen als aangegeven. Let op; 3 posities mogelijk, o graden gekanteld, 5 graden gekanteld en 10 graden gekanteld.
  • Page 7 Place bolts washers and spring washers as shown. Note; 3 positions possible, 0 degrees tilt, 5 degrees tilt and 10 degrees tilt. After choosing desired position tighten all bolts! Plaats bouten sluitringen en veer ringen als aangegeven. Let op; 3 posities mogelijk, o graden gekanteld, 5 graden gekanteld en 10 graden gekanteld.
  • Page 8 FLEX-1840 ready to receive FLEX mounting arms (not included) FLEX-1840 gereed om FLEX montage armen te monteren (niet inbegrepen)
  • Page 9 Audipack reserves the right to make changes in specifications and other information contained in this document without prior written notice. The information provided herein is subject to change without notice. In no event shall Audipack be liable for any incidental, special, indirect, or consequential damages whatsoever, including but not limited to lost profits, arising out of or related to this manual or the information contained herein, even if Audipack has been advised of, known, or should have known, the possibility of such damages.