G2M Janton M96 Notice Technique D'instruction

Composition
1 internal fitting + 1 external fitting
Spares parts
Screws
Bearings
Lock
Bal bearings
Spring
Rivets
Restriction on use / Precautions for use
The product must be used within the recommended weight limits and in accordance with the assessment
made by an approved ortho-prosthetist depending on the patient concerned
At the time of shaping the thigh and leg amounts, be careful not to deform the mechanism of the joint
Product maintenance is subject to an assessment made by an approved ortho-prosthetist depending on the
conditions of use
All assembly and adjustment work must be carried out by qualified personnel
Cleaning / Storage
Stock the product in a dry place, in its original packing (on which the batch number is marked)
The frequency of inspections to check the equipment is subject to the assessment made by the ortho-
prosthetist depending on the patient concerned
Guarantee
The guarantee is valid for one year as from the date of purchase of the product, if the product has been used in
accordance with the manufacturer's instructions.
N.B. In the event of a complaint, please enclose a return form correctly filled in, incomplete forms cannot be dealt with.
EC markings
Groupe G2M hereby declares, in its quality as the manufacturer, that all its parts comply with directive 93/42/EC.
168 ZA des Aubrières - 49412 SAUMUR Cedex (FRANCE)
Tél. : +33 (0)2 41 50 50 91 - Fax : +33 0(2) 41 83 05 82 - E-mail : info@groupe-g2m.com
4/4
M96 M97 M98
V03406 V03406 V03405
V0156T V0157T V0157T
V406196 V405165 V405134
M8809 M6509 M2707
V0024 V0024 V0024
M2501 YRC0548 YRC0548
V17315 V17312 V17312
www.groupe-g2m.com
NOTICE TECHNIQUE D'INSTRUCTION
Désignation
Articulation à secteur avec verrou coulisseau et articulation libre plat sur plat.
M96 : Série forte
Montant de section 22 x 6 mm
M97 : Série légère
Montant de section 20 x 5 mm
M98 : Série enfant
Montant de section 18 x 4 mm
Destination
Articulation de genou entrant dans la fabrication d'orthèses du membre inférieur.
M96/M97/M98
à
billes
Chape ép. : 6 mm Poids : 800 g
Chape ép. : 5 mm Poids : 602 g
Chape ép. : 4 mm Poids : 360 g
1998