YORKVILLE NX Flyware NXF35U Mode D'emploi

Yorkville NX Flyware
All Yorkville NX speaker enclosures are equipped with flying hardware. To increase
the options, several hardware kits have been developed to expand the NX enclo-
sure's capabilities for overhead suspension applications. Flying the enclosures in dif-
ferent angles, attaching to walls and even setting up arrays are now possible to do
easily and, most importantly, safely.
IMPORTANT!! The rigging of loudspeaker systems is an extremely serious matter. Overhead rig-
ging requires extensive experience, including (but not limited to) calculating working load limits,
hardware installation, and periodic safety inspections of all hardware and cabinetry. If you lack these
qualifications, do not attempt the installation yourself, but instead use a professional structural rigger.
Improper installation can result in bodily injury or death. Consult a structural engineer to calculate
added loads for a building. Structural reinforcement may be necessary to insure a safe installation.
The NXF35U System
The NXF35U kit allows enclosures to be mounted in more ways than
standard shackle and cables allow. By using the NXF35U bracket, the
multiple fly-point options allow the rig to be flown at different angles. The
bracket also helps secure the NX enclosure to the truss or roofing sys-
tems. The NXF35U is easily mounted strategically to the top and bottom
of the enclosure. Additionally, the NX enclosure can be rotated up to 30-
degrees across the horizontal plane (within the bracket housing).
NXF35W Wall Mounting (optional)
The optional NXF35W has been designed to add more capability and
versatility for wall mounting applications. The NXF35U attaches to the
The NXF35U Bracket
NXF35W wall-mount bracket enabling vertical angles of up to 30-degrees.
The NXF35A Array Link
brackets together safely and securely which makes it fairly simple to
install for flying two or three enclosures (up to six) in the circular arrays.
The optional NXF35W
NX Flyware System Components
Wall Mounting Bracket
NXF35U – Steel U-bracket and Enclosure Adapter Plates
(upper and lower).
NXF35W – Wall-Mounting Bracket (for mounting the NXF35U
bracket to wall or pillar).
NXF35A – Array Adapter (to properly array and space out multiple
NXF35U Flying assemblies)
An ideal cluster array is easily assembled using three NXF35U U-
brackets kits, and two NXF35A kits (shackles and cables not included).
The NXF35U Bracket
with the optional
NXF35A Installed. Three
enclosure array.
All manuals and user guides at all-guides.com
NXF35A Flying Arrays
(optional)
When using multiple enclosures, the optional
NXF35A Array Adapter connects NXF35U
brackets together to form perfect 60-degree
Assembly Kit
spacing. The NXF35A joins the NXF35U U-
Note: the NXF35A Array Link Adapters cannot be used with the NXF35W
Wall-Mount Kit.
Note: all necessary nuts and bolts are included with kits
Canada
Voice: (905) 837-8481
Fax: (905) 837-8746
w w w . y o r k v i l l e . c o m
Yorkville Sound
550 Granite Court
Pickering, Ontario
L1W-3Y8 CANADA

30-degrees horizontal
rotation allows NX enclo-
sures to be mounted
along walls of venues.
INDEX
English
NXF35U U-Bracket ........ 2
NXF35W Wall-Bracket ... 3
NXF35A Array Adapter .. 4
Français
NXF35U Support en U
en acier ....................... 6
NXF35W Quincaillerie
pour montage mural ...... 7
NXF35A Quincaillerie pour
relier les enceintes en dis-
position circulaire ............ 8
U.S.A.
Voice: (716) 297-2920
Fax: (716) 297-3689
Yorkville Sound Inc.
4625 Witmer Industrial Estate
Niagara Falls, New York
14305 USA