YORKVILLE NX Flyware NXF600 Mode D'emploi

Yorkville NX Flyware
All Yorkville NX speaker enclosures are equipped with flying hardware. To increase
the options, several hardware kits have been developed to expand the NX enclo-
sure's capabilities for overhead suspension applications. Flying the enclosures in dif-
ferent angles, attaching to walls and even setting up arrays are now possible to do
easily and, most importantly, safely.
IMPORTANT!! The rigging of loudspeaker systems is an extremely serious matter. Overhead rig-
ging requires extensive experience, including (but not limited to) calculating working load limits,
hardware installation, and periodic safety inspections of all hardware and cabinetry. If you lack these
qualifications, do not attempt the installation yourself, but instead use a professional structural rigger.
Improper installation can result in bodily injury or death. Consult a structural engineer to calculate
added loads for a building. Structural reinforcement may be necessary to insure a safe installation.
The NXF600U System
The NXF600U kit allows enclosures to be mounted in more ways than
standard shackle and cables allow. By using the NXF600U bracket, the
multiple fly-point options allow the rig to be flown at different angles. The
bracket also helps secure the NX enclosure to the truss or roofing sys-
tems. The NXF600U is easily mounted strategically to the top and bot-
tom of the enclosure. Additionally, the NX enclosure can be rotated up
to 30-degrees across the horizontal plane (within the bracket housing).
NXF600W Wall Mounting (optional)
The optional NXF600W has been designed to add more capability and
versatility for wall mounting applications. The NXF600U attaches to
The NXF600U Bracket
the NXF600W wall-mount bracket enabling vertical angles of up to 30-
spacing. The NXF600A joins the NXF600U U-brackets together safely
and securely which makes it fairly simple to install for flying two or three
enclosures (up to six) in the circular arrays.
The optional NXF600W
NX Flyware System Components
Wall Mounting Bracket
NXF600U – Steel U-bracket and Enclosure Adapter Plates
(upper and lower).
NXF600W – Wall-Mounting Bracket (for mounting the NXF600U
bracket to wall or pillar).
NXF600A – Array Adapter (to properly array and space out multiple
NXF600U Flying assemblies)
An ideal cluster array is easily assembled using three NXF600U U-
brackets kits, and two NXF600A kits (shackles and cables not included).
The NXF600U Bracket
with the optional
NXF600A Installed. Three
enclosure array.
degrees.
NXF600A Flying Arrays
(optional)
When using multiple enclosures, the optional
The NXF6000A Array
NXF600A Array Adapter connects NXF600U
Link Assembly Kit
brackets together to form perfect 60-degree
Note: the NXF600A Array Link Adapters cannot be used with the NXF600W
Wall-Mount Kit.
Note: all necessary nuts and bolts are included with kits
Canada
Voice: (905) 837-8481
Fax: (905) 837-8746
w w w . y o r k v i l l e . c o m
Yorkville Sound
550 Granite Court
Pickering, Ontario
L1W-3Y8 CANADA

30-degrees horizontal
rotation allows NX enclo-
sures to be mounted
along walls of venues.
INDEX
English
NXF600U U-Bracket .......2
NXF600W Wall-Bracket ..3
NXF600A Array Adapter .4
Français
NXF600U Support en U en
acier .......................
NXF600W Quincaillerie pour
montage mural ......
NXF600A Quincaillerie pour
relier les enceintes en disposi-
tion circulaire ............
U.S.A.
Voice: (716) 297-2920
Fax: (716) 297-3689
Yorkville Sound Inc.
4625 Witmer Industrial Estate
Niagara Falls, New York
14305 USA
Manual-Owners-NXF600U-00-2v0.pdf
6
7
8