Casselin CDEC10 Mode D'emploi page 14

3. TRANSPORT, PACKAGING AND STORAGE
3.1 Inspection after transport
The check for the absence of damage and the completeness of the device must be made upon receipt of the
package. In the event of identification of damage due to transport, refuse or accept the delivered product only
with reservations *. A complaint detailing the defects observed must then be made. The perception of damage
is only possible in the event of a complaint formulated within the prescribed time limits, ie 24-48 hours
maximum.
* written on the carrier's delivery papers or digital.
3.2 packaging
The packaging of the device must be kept in case of moving, or for a return to the after-sales service. The
inner and outer packaging must be completely removed before using the device. The standards in force in
your country concerning environmental protection must be observed before destroying the packaging.
3.3. Storage
WARNING
The device can be kept in stock, but only in its original, closed packaging.
Storage can be carried out in accordance with these conditions:
• Storage in a dry and non-humid place
• Sheltered from the sun
• Control of the stock exceeding 2 months (general condition of the device and all the constituent elements)
• No material shaking
• Storage in closed room and not outside.
4. EQUIPMENT CHARACTERISTICS
* Subject to change
Model
Temperature
Capacity
Electrical data
Dimensions of the tank Ø 225 mm, H 395 mm
Weight
Model
Temperature
Capacity
Electrical data
Dimensions of the tank Ø 318 mm, H 490 mm
Weight
CDEC68
30 ° C to 100 ° C
6.8 Liters
950 W / 230 V
Ø 225 mm, H 470 mm
2.3 Kg
CDEC20
30 ° C to 100 ° C
20 Liters
2,500 W / 230 V
Ø 318 mm, H 560 mm
3.58 Kg
CDEC10
30 ° C to 100 ° C
10 Liters
1600 W / 230 V
2.5 Kg
CDEC25
30 ° C to 100 ° C
25 Liters
2,500 W / 230 V
4.85 Kg
CDEC15
30 ° C to 100 ° C
15 Liters
1650 W / 230 V
Ø 273 mm, H 468 mm
3.25 Kg
CDEC30
30 ° C to 100 ° C
30 Liters
2,800 W / 230 V
Ø 318 mm, H 460 mm
5.5 Kg
EN