Publicité
Les langues disponibles
Les langues disponibles
INSTRUCTION MANUAL
EN
KA5653BK - KA5653DW - KA5654BK - KA5654DW - KA5655BK - KA5655DW
Main Features
1.
Time Display Mode:
2.
Calendar Mode:
3.
Alarm Mode:
4.
Temperature Mode:
5.
3 Display Modes:
6.
Power saving mode:
7.
Power supply:
FULL Screen Display
PM Indicator
Alarm Symbol
Operating Instructions
After power on, LED turns on with a beeping sound and will enter the time setting mode.
Under time display mode, press the SET button to check below in sequence
Time --> Calendar --> A1 (Alarm 1), A2 (Alarm 2), A3 (Alarm 3).
Time Setting:
1.
Under the Time Mode, press and hold the SET button for 2seconds to set the clock.
2.
Press the SET button repeatedly to set the time in the following sequence :
12/24hr switch over --> Hour --> Minute -->Exit
3.
Press the UP / DOWN buttons to adjust the hour and minute digits. Press and hold the UP / DOWN buttons to speed up
the scanning of the digits.
4.
When the 12 hour format is set, the PM indicator on the top left corner will appear in the afternoon
5.
The setting mode will return to time display mode if there is no operation for 15 seconds.
Date Setting:
1.
Under the Calendar Mode, press and hold the SET button for 2 seconds to set the date.
2.
Press the SET button repeatedly to set the date as the following sequence:
Year -->month-->day-->Exit
3.
Press the UP / DOWN buttons to adjust the year, month and date. Press and hold the UP / DOWN buttons to speed the
scanning of the digits.
4.
The setting mode will return to time display mode if there is no operation for 15 seconds
Alarm Setting:
3 alarm time settings are possible, you can store 3 different alarm times in the memory.
1.
Under the Alarm Mode A1, press the UP button to turn on the alarm and press again to turn off.
2.
When A1 is activated, 'oN A1' will appear on the display, quickly then it will enter to alarm time display.
3.
Press the SET button for 2 seconds and the display will flash now you can set the alarm time.
4.
Press UP/DOWN buttons to adjust the alarm time. Press and hold the UP/DOWN button to speed up the scanning of the
digits.
5.
When the Alarm is activated, the Alarm Symbol will turn on.
6.
The setting mode will exit if there is no operation for 15 seconds.
*A2 and A3 alarm can be set in the same way as A1.
*Alarm will ring for 1 minute at the set time, press any button to stop the alarm.
*Please note the alarm symbol will stay on and will ring the next day at the same time unless deactivated in the alarm settings.
12 or 24 hour time display
Display month and date
Triple alarm time setting
Range from 0°C - 50 °C (32 °F - 122 °F)
dp-1,dp-2 and dp-3
Activate LED display by sound or touch
3xAAA Batteries or USB Cable
3Vbuilt-in battery to keep time memory
Temperature Symbol
:
Publicité
