GPO Brooklyn Boombox Manuel D'utilisation page 11

T ape
1. Turn the unit on using the Power Button
2. Press Eject on the tape control panel to open the cassette tape slot
3. Insert a cassette tape into the cassette tape slot on the front of the
unit
4. Close the slot
5. Turn the Function Knob to Tape
6. The Tape LED light will be illuminated and the timer clock will begin
counting up from zero
7. This counter can be reset at any point using the reset button next to
the timer clock
8. Use the play, tracking and stop buttons on the unit to play the
cassette
9. The cassette auto stop will ensure the tape stops at the end of each
side. At this point, eject the tape, remove it, turn it around and re-
insert it
10. Press play again to resume playback
11. To remove the cassette, press Stop/Eject once to stop playback
and a second time to eject the tape
12. While using any of the unit's other modes, you can press the record
and play buttons together to record music to a blank cassette tape
GPO_Brooklyn_Manual EU - Dec 2017_v2.indd 11
11
30/11/2017 14:50