Télécharger Imprimer la page

SCS Sentinel DAAF-3Y-CE Manuel D'installation Et D'utilisation page 14

Publicité

Les langues disponibles

Les langues disponibles

INTRODUCTION
Product characteristics
• Standard EN 14604 : 2005.
• Essential for receiving a rapid warning of any vital risk
related to fi re smoke.
• Visual and very powerful audible alarm of 85 dB.
• Ideal for apartments and houses.
• Power supply: 9 Volt battery supplied.
• Operating temperature : 4°C to 38°C.
• Dimensions : 102 x 102 x 35 mm.
• Detection type: electro-mechanical.
• Consumption when idle: <8µA.
• Consumption in alarm mode: <16mA.
• Sensibility in the smoke: 3.0 - 6 % per meter of darkening.
• Protection against insects.
• Test button.
• High and stable sensitivity.
• LED indicator light.
• Low or no battery warning light.
• Put back to automatic zero after disappearance
of the smoke.
• Secure detector and battery assembly.
Our single station photoelectric smoke detector is designed to sense smoke
that comes into the detector chamber. It does not sense gas, heat, or
fl ame. This smoke detector is designed to give early warning of developing
fi res by giving off the alarm sounds from its built-in alarm horn. It can provide
precious time for you and your family to escape before a fi re spreads.
However, the smoke detector makes such pre-warning of fi re accident
possible, only if the detector is located, installed, and maintained properly
as described in this User's Manual.
DAAF 3Y PS-NOTICE_0314.indd 14
Important: Before installing, please read this manual carefully.
Important: Before installing, please read this manual carefully.
This manual is an integral part of your product.
Keep it in a safe place so that you can refer to it at a later time.
Power supply : autonomy 3 years
0 892 350 490
(0.34 € TTC per minute)
- 14 -
ENGLISH
04/04/2014 09:05:28

Publicité

loading