Publicité
Les langues disponibles
Les langues disponibles
INSTALLATION INSTRUCTIONS
• Use a level to draw the cooktop centerline location. Draw the line to ceiling height.
• Use a level to draw the cooktop surface location.
INSTALL BACKSPLASH
Remove packaging
Place backsplash against the wall and match the centerline and cooktop surface
Mount the backsplash to the wall through the holes at top and bottom by using M3.5x30mm self-tapping
screws (2x at top,2x at bottom)
NOTE: Make sure screws are installed in vertical studs as much as possible
Centerline
Cooktop surface
Install mounting bracket onto the wall
9
Publicité
