Greencut MFA360 Manuel D'utilisation page 23

BOX CONTENTS
-
1x Folding mechanic's table MFA360
- 1x Instruction manual
• Remove the product and accessories from the box carefully. Make sure all the items listed above are present.
• Inspect the product carefully to make sure it has not suffered any breakage or damage during transport.
• Do not discard the packaging material until you have thoroughly inspected the product and used it satisfactorily.
ATTENTION: If any part is missing or damaged, contact the Official Technical Service. Do not use
this product without having replaced the missing or damaged part. Using this product with
damaged or missing parts can cause serious injury to the operator.
ASSEMBLY
LYING DOWN
1. Secure the three sections of the padded tarpaulin to the metal frame with the M8x55 hex head screws and
M8 lock nuts. Tighten the M8 hex head screws and nuts securely.
2. Install the 6 swivel castors on the metal frame of the mechanic's stretcher.
SITTING
1. Pull the locking pin to release the mechanism.
2. Move the centre frame of the stretcher towards the end until it is seated horizontally.
3. Perform the reverse steps to convert the seat to a stretcher.
23
EN