Brickcom Cube Serie Guide D'installation Facile page 4

Step 2. Install Camera and Network Devices
< CB Series>
Wired Connection
Connect the supplied power cable from the camera to a power outlet and the camera to a switch
via Ethernet cable.
Wireless Connection
Connect the supplied power cable from the camera to a power outlet. And press WPS button
both on the camera and the wireless router (DWRT-600N).
1) Terminal I/O Connector Block Connection
Attach the supplied connector block to the terminal connector on the camera. Refer to the
diagram below to attach external devices to the connector block.
All manuals and user guides at all-guides.com
2