Duronic JE2 Manuel D'utilisation page 10

Pay attention to the following whilst using the electric appliance:
1. Read the instruction carefully before use and keep them for future
reference.
2. Before use, ensure the local power voltage is consistent with the rated
voltage indicated on the product.
3. Before dismantle or installing any part of the product, disconnect it from
the power supply.
4. Before use, check the cable, plug and all loose parts for damage. Should
there be any damage or deformation, do not use the product. Contact the
customer service department for a repair or replacement.
5. To prevent damage or the cause of fire, do not use this product with a
timer.
6. To prevent the risk of electric shock and damage do not immerse the
machine in water. Use a soft cloth for cleaning.
7. Keep all your body parts as well as hard objects out of the feed inlet during
the operation. Do not use any other objects instead of the pushing rod to
push the food down. The contact with the rotor would cause injury and/or
damage. Use only original parts provided by manufacturer.
1. After use, unplug the machine and wait
until it has cooled off completely.
2. Clean all removable parts in warm,
soapy water. Clean the main body with
a soft wet cloth. Dry everything fully.
All manuals and user guides at all-guides.com
Precautions:
Cleaning and maintenance
10