Aslo ASL870 Mode D'emploi page 16

7. OPERATION INSTRUCTION
7.1 Backlit & Power ON/OFF Function.
7.2 Power on/off, press
7.3 Data hold; In the measuring mode, press
release the held reading, press
7.4 MAX/MIN; In the measuring mode, press
displayed on the LCD, press
LCD. Long press , the meter exit MAX/MIN measurement mode and back to normal measuring mode.
7.5 key: with the meter on, press,
7.6 Use of compound key
7.6.1 With the meter off, press
is preset.
7.6.2 With the meter off, press
indicates the power off functions is disabled. You need to turn off the meter through pressing by manual.
Note: When icon displayed on the screen, it indicates that the meter will automatically turn off after approx. 15 minutes of
inactivity.
8. NOTES
1. This meter has already been calibrated before delivery. Do not revise the calibration parameters without professional personnel and
device.
Note: All products are well calibrated before delivery. Recommended recalibration cycle: I year.
2. Repairs or servicing not covered in this manual should only be performed by qualified personnel.
3. Wipe the unit with a dry soft cloth periodically. Do not use abrasives or solvents on this instrument.
4. Remove the battery when the meter is to be stored for long periods of time to avoid battery leakage.
5. When the battery is low, LCD display
6. Do not store or operate the meter in high temperature or humidity.
9. ACCESSORIES
1 User's manual
3 1,5V AAA, Battery
to turn on/off the meter Backlit will be on once meter is power on.
"HOLD" Icon will appear on the LCD, which indicates the data is freezed. To
again.
again, "MIN" will appear on the LCD and the captured minimum readings will be displayed on the
to select light units of FC/LUX.
first and hold, then press,
first and hold, then press
a new battery is needed.
"MAX" will appear on the LCD. the captured maximum readings will be
to power on the meter, it can change temperature unit (°C/ °F), °C
,to power on the meter, icon on the LCD display disappear, which
16