Publicité
7
8
9
10
11
12
13
7
Indoor Humidity rate display
8
Weather forecast display
9
Hour & Minutes display
10
Alarm 1 icon display
FEATURES
1) Display hour & Minute; Month & Day
2) Indoor temperature and humidity display
3) 12/24-hour display.
4) Temperature display in degrees Celsius (°C)
or Fahrenheit (°F) selectable
5) Dual alarm with Snooze
6) Weather forecast: Sunny / Slightly Cloudy /
Cloudy / Rainy
7) Time and temperature projection
8) Projection distance between 1-3M,
9) Projection image flips 90 or 180 degree
FUNCTIONS BUTTONS
1 - SET
- Press to toggle between the display of date,
alarm 1, and alarm 2
- Under TIME mode, hold SET button to go to
Time setting mode
- Under ALARM TIME mode, hold SET button to
go to Alarm time setting mode.
15
14
11
Date display (Day and Month)
12
Alarm 2 icon display
13
Weekday display
14
Indoor Temperature display
15
Focus projection button
16
Continuous projection button
17
Micro USB port
18
Battery compartment
direction
10) Blue LED backlight.
11) Weekday in 5 languages – French / English /
German / Italian / Spanish
12) With micro USB DC jack.
13) Temperature range: 0°C ~ +50°F
14) Humidity range: 20 ~ 95%
15) Month-Day / Day-Month format selectable
16) Low battery indicator
17) Operated by 2 x 1.5V AA batteries
(not included) or USB cable (included)
2 - UP/°C - °F
- Press to change to °C or °F
- Under setting mode (hour, alarm, date etc..),
press the button to increase the set unit
- Under setting mode (hour, alarm, date etc..),
hold the button to increase the set unit under
fast speed
8
3 - DOWN/LIGHT
- When operating with batteries, press once and
the backlight will be lighted up for 10 seconds
- When operating with USB cable press once to
16
turn on the permanent backlight. Press again
to turn off the backlight.
- Under setting mode, press the button to de-
crease the set unit
17
- Under setting mode, hold the button to de-
18
crease the set unit under fast speed
4 - ALARM
- Press it to activate or deactivate the alarms
- ALARM 1 On
ALARM 2 On
ALARM 1 + ALARM 2 ON
ALL OFF
ALARM 1
ALARM 1+ALARM 2
ALARM 1 + ALARM 2
SETTINGS
1 - Time setting
- In the time mode, hold SET button for 3 seconds to enter into Time setting mode.
- The setting section will flash.
- The settings sequence is : Hour
language
exit
- Press or hold UP or DOWN to adjust.
- If no operation within 30 seconds, the time setting mode will switch off automatically.
2 - Alarm Setting
ALARM 1
- Under time display press 1 time on the SET button and then hold the SET button for 3 seconds to
enter into ALARM1 SETTING mode
- The setting section will flash. The setting sequence is
- Press or hold UP or DOWN to adjust.
- If no operation within 30 seconds, the alarm setting mode will switch off automatically.
5 - SNOOZE/PROJECTOR
PROJECTOR :
- Press to toggle between time and temperature
projection during Time mode.
- When powered by USB cable, the continuous
projection switch at the back side is active
turn it on for permanent projection. Turn it off
to stop the projection.
- When powered by batteries only the conti-
nuous projection switch is not active, press the
SNOOZE/PROJECTOR button to project for 10
seconds.
- Hold for 3 seconds the SNOOZE/PROJECTOR
button to flip the projection image by 90 or
180 degree.
SNOOZE :
- Press it to activate the snooze function for the
alarm when the alarm mode is on.
ALARM 2
all off
Minute
12/24H
Year
Month
Date
Hour
Minute
9
DM/MD
Publicité
