Vanderbilt V44 Duo Manuel D'installation Et Utilisation page 14

14
Change codes
1 Press B and enter the current password.
2 Enter A22.
3 Enter the current code. If it is a 4-digit code, enter A
after the last digit.
4 Enter the new code using four or six digits.
5 Enter the new code once again.
6 Choose whether or not the code should be disabled
from a time clock.
0 = no time control
1 = code disabled from time clock 1
2 = code disabled from time clock 2
7 Choose which relay output to control.
0 = both relay outputs
1 = relay output 1
2 = relay output 2
8 Change the next code by continuing from step 3 or
press B to leave code program
V44 Duo Installation & User manual