GeneralAire GF AC22 Instructions D'installation

INSTALLER: PLEASE FILL OUT AND MAIL G UARANTEE CARD AFTER INSTALLATION
IS COMPLETE.
This air cleaner is designed for use in systems up to 2000 CFM. For higher airflows additional units
may be required. See Typical Installations below.
RETURN AIR
GENERALAire AC-22
HIGH BOY
HIGH EFFICIENCY AIR CLEANER
IMPORTANT: A 26 INCH CLEARANCE MUST BE ALLOWED FOR REMOVAL OF THE MEDIA FRAME
ASSEMBLY FROM THE CABINET.
1. Turn off electricity to furnace.
2. Pull front cover off and slide media carrier out of air cleaner cabinet. Discard packing material.
3. Remove and discard existing furnace air filter.
4. Install cabinet in return air system. Duct supports are recommended to support weight of cabinet.
5. Refer to care and maintenance instructions for installation of air cleaner media and pleat spacers.
6. Slide the media frame assembly into the cabinet. Be sure the airflow arrow on the media frame points toward
the furnace blower. The plastic pleat spacers are always on the downstream side of the filter media.
7. Install condition indicator and nameplate in upright orientation.
8. Turn on electricity and furnace, calibrate condition indicator and check performance of all equipment.
1913116"
>---------2:z' ---------<
LEAVE INSTALLATION INSTRUCTIONS WITH HOME OWNER
WARM AIR
COUNTER-FLOW
INSTALLATION INSTRUCTIONS
HIGH EFFICIENCY
FOR INSTALLATION IN THE
RETURN AIR DUCT OF ANY
FORCED AIR HEATING AND
WARM AIR
LOWBOY
2615116"
.
I .
21 3116"
259116"
GFAC22
AIR CLEANER
COOLING SYSTEM
GENERALAire
FLOWTHRU
SERIES HUMIDIFIER
.
�
221
Ill"
1913116"
.