Berker 7574 01 01 Mode D'emploi page 32

z
Using individual pictures/graphics
A large library of graphics is available at the factory for designing operating
and display pages for applications in light, blind and HVAC control technology
as well as multimedia and safety technology, which is stored in the device.
Additionally, you can load your own graphics for icons or control knobs, pic-
tures or picture sequences into the device. These have to be saved on a micro
SD card at the topmost level in a defined resolution and specific file format.
When doing so, it is essential to use the predefined folder names (Table 3).
Moreover, the image files must be named with a 4-digit numerical sequence -
(0001 ... 9999) - in order to be retrievable in the ETS or in the display menu.
Pictures/graphics for:
Slideshow as screen-
saver
Single picture display as
screensaver
Still picture display
small icon
Control knob
only configurable over the ETS, not directly selectable on the screen
1)
The device is connected, but not yet mounted, so that the slot for Micro SD
Card (3) is accessible. The system has not yet started up. Pictures/graphics
are stored on a micro SD card.
If the system already started up before inserting the micro SD card, in
menu
„ Insert micro SD card into the slot (3) until it snaps into place. When doing
so, make sure that the contacts of the card are facing up towards the
display.
„ Switch on auxiliary voltage.
The device starts up.
Einstellungen System
In the display menu, an individual screen saver can be set with image data
Sprache Sprache der
System editierbaren Texte
from the Micro SD Card.
„ With
07:22
Bildschirm Tastenton
The display changes to the menu
„ With
32
All manuals and user guides at all-guides.com
Resolution
320 x 240 px
320 x 240 px
320 x 240 px
1)
48 x 48 px
1)
158 x 158 px
1)
Table 3: My pictures/graphics on micro SD card
- execute a
Einstellungen System
Sprache Sprache der
System editierbaren Texte
enter menu
Bildschirm Tastenton
/ scroll in the bottom display row (10) to the setting parameter
and select.
File format
jpg (RGB colour
space)
jpg (RGB colour
space)
jpg (RGB colour
space)
png
png
. The device is restarted.
, and then select
.
Folder name
diashow
diafix
festbilder
icons
icons
.