CERTIFIED 009-1057-2 Mode D'emploi page 3

OWNER AND/OR OPERATOR RESPONSIBILITY
It is the owner's and/or operator's responsibility to read and understand all WARNINGS
and operating and maintenance instructions contained on the product table and
instruction manual prior to operation of this unit.
It is also the owner's and/or operator's responsibility to provide maintenance, maintain
all decals or warning labels and in general while in use, maintain the unit in good working
order.
TO RAISE:
1. Place car in "Park". Apply emergency brake and block wheels.
2. Place handle in the hole of the handle socket.
3. To raise load, turn handle clockwise.
4. Be certain the saddle is correctly positioned under vehicle (as recommended by
vehicle manufacturer) as you are raising the jack.
5. Raise load to desired height. Transfer the load to jack stands.
TO LOWER:
1. Remove jack stands.
2. Repeat step 3 using a counterclockwise motion with the jack handle.
3. Remove jack from underneath vehicle.
LUBRICATION:
Spray multi-purpose lubricant on pivot points of jack.
Apply multi-purpose grease to worm gear.
PREVENTING RUST:
Store jack in a clean, dry environment.
Clean as needed and wipe with an oily cloth.
Imported by Trileaf Distribution Trifeuil Toronto, Canada M4S 2B8
All manuals and user guides at all-guides.com
OPERATION PROCEDURES
MAINTENANCE PROCEDURES
3