E-Mu 1616 Mode D'emploi page 12

Rear Panel Connections
4 Balanced Line Level Inputs
(configured as 2 stereo pairs)
1L 1R
In
Out
1L 1R
6 Balanced Line Level Outputs
Four balanced 24-bit, line-level, analog inputs are provided (Stereo 1-2). These can be used to
input any line level signal such as a keyboard, CD-player, cassette deck, etc. (The analog inputs are
assigned to mixer strips in the PatchMix DSP mixer application.) Input line level can be set to
Line Level
accommodate the consumer -10dBV standard, or the pro audio +4 dBu standard in the I/O screen
Analog Inputs
of the Session Settings dialog box.
Either TRS balanced or TS unbalanced cables can be used. Balanced cables provide better noise
immunity and +6dB higher signal level, but standard mono instrument cables also work well.
10 - E-MU Digital Audio System
All manuals and user guides at all-guides.com
Turntable Inputs
(tied to line input 2)
2L 2R
2L 2R
(configured as 3 stereo pairs)
Turntable
Ground
Phono
2L 2R
Gnd
1
3L 3R
Alternate Outputs
(same as outputs 1-3)
MIDI Port
Connector
MIDI Cable
Out
2 3
E-MU 02 CardBus Card
48 Volt DC
Power Input
48 VDC
+ -
EDI
Connect to