RCA RNSM4504 Manuel D'instructions page 24

1. Press MENU key to display the main menu on the screen.
2. Press key to select "Option" option.
▲/▼
3. Press key to enter "Option" submenu.
► or ENTER
OSD Language
1. Press key to select "OSD Language" option.
▲/▼
2. Press ENTER or ► key to enter submenu.
Press key to select a proper language for OSD.
▲/▼
OSD Time
Set the preferred amount of time
for the OSD to be displayed on the screen.
Closed Caption
1. Press key to select "Closed Caption" option.
▲/▼
Press ENTER or key to enter submenu.
►
2. Press key to select CC mode.
▲/▼
Reset
1.Press key to select "Reset" option.
▲/▼
2.Press or ENTER key to confirm.
►
3.Press "Yes" to confirm again, TV will turn off automaticly and change all setting to factory
setting.
Network Configuration
Please refer to "Network setting"behind.
Software Update(USB)
When the TV need to be updated, please copy the new software to a USB storage and
inset the USB storage to TV, then operating by following steps.
1.Press key to select "Software Update" option.
▲/▼
2.Press or ENTER key to confirm.
►
3.Press "Yes" to confirm again, the TV will update by USB, Please wait a few minutes
and don't turn off the power, it will turn off automaticly when updating is finish.
View End-User License
1.Press "/" key to select "View End-User License" option.
2.Press "" or "ENTER" key to confirm.
Internet Update Check
This can update TV through internet.
Network Update Information
Display the Network Update Information.
User Mode
1.Press key to select "User Mode" option.
▲/▼
2.Press ► or ENTER key to confirm.
3.Switch to use mode "Home" or "Store".