Avtech KPD Serie Mode D'emploi page 6

3.2 Camera Connection
The cameras must be connected and power-supplied BEFORE the DVR is turned on. The DVR will automatically
detect the video system of the connected camera(s) (NTSC / PAL), and switch itself to the correct system.
Connect the camera with the indicated power supply, and connect the camera video output to the DVR video input
port with a coaxial cable or RCA lines with BNC connectors.
Note: For detailed DVR video input / output ports, please refer to "2.3 Rear Panel" in the user's manual.
For detailed camera operation, please refer to its own manual.
Note: If you want to make a video backup with audio, please connect audio cameras to the channels
which support the audio function
For 16CH & 8CH DVR, the audio channels are CH1, CH2, CH3 and CH4.
For 4CH DVR with a fan built-in, the audio channel is CH1.
3.3 Power Setup
This device should be operated only with the type of power source indicated on the manufacturer's label. Connect
the indicated AC power cord to the power adapter, and plug into an electrical outlet. Power LED "
It takes approximately 10 to 15 seconds to boot the system.
3.4 Date and Time Setting
Before operating your DVR, please set the date and time on your DVR first.
Press (menu) button and enter the password to go to the quick-start menu list. The default admin password is
0000. Move the cursor to the icon
CHANNEL TITLE
EVENT STATUS
IMAGE SIZE
QUALITY
IMAGE PER SECOND
RECORD TIMER
DETECTION TIMER
DATE
FORMAT
DAYLIGHT SAVING
ADVANCE SELECT
Note: If the time and date settings return to their default values after the DVR is rebooted, please charge
the DVR for at least 24-48 straight hours. Please contact your local retailer if the situation still occurs.
All manuals and user guides at all-guides.com
and you can set the date / time / daylight saving in this menu list.
QUICK START
ON
ON
CIF
BEST
120
OFF
OFF
2007 / AUG / 08
Y / M / D
OFF
BACK NEXT ENTER
5-
" will be on as blue.
21 : 30 : 00