LUND 310046 Instructions D'installation

For proper installation and best possible fit, please read all instructions BEFORE you begin.
For technical assistance or to obtain missing parts, please call Customer Relations at 1-800-241-7219.
Important Safety Information
WARNING
• To be used with Lund® branded products only.
• Do not stand on Lund running board or bracket while vehicle is in motion.
• Do not exceed 350 lbs. weight on the Lund bracket system.
• Do not use the brackets as a jacking point for the vehicle.
• Do not use the bracket system or running boards to fasten cargo.
• Periodically check all components for tightness.
CAUTION
• Be sure to wear safety glasses while installing brackets.
• When using power tools, read and understand all operating instructions.
Contents
Tools Required
Safety Glasses
Preparation Before Installation
1. Park your vehicle in a clean, level location. Check to make sure the vehicle is in park, or for
manual drive models, place the transmission in first gear. Engage the parking brake.
2. Chock one wheel on both sides with wheel chocks.
3. Unpack the bracket kit and identify the parts according to the content descriptions above.
Installation Instructions
OE Style No Drill Bracket
Bracket (M-1141)
X6
Ratchet
1
PAGE OF
Not all supplied fasteners used in this application
Hex Head Bolt
Flange Nut (M8-1.25)
(M8-1.25 x 20mm)
X8
13mm Socket
12
Kit #310046
10402
Rev B
X8
Wheel Chocks