Xiaomi Mi Smart Standing Fan Pro Manuel D'utilisation page 3

If the supply cord is damaged, it must be replaced by the manufacturer,
its service agent or similarly qualified persons in order to avoid a hazard.
Do not strike, crush, and drop the product, or expose it to pressure.
Keep the product away from water and heat sources.
Do not use this product in environments where the temperatures
and humidity are extremely high. Avoid direct sunlight.
Do not remove, disassemble, or destroy the ba ery.
Do not charge this product for an extended period of time when it is not in use.
This appliance contains ba eries that are non-replaceable.
PRECAUTIONS
Installation
To avoid electric shocks, fire, personal injury, or other damage, please
strictly follow the installation steps instructed by the user manual, and
make sure the fan base is assembled in the last step.
Do not connect the fan to a power outlet or the charging base if it is
not completely assembled.
Turn off or unplug the fan before installing or disassembling it. Do not
connect the charging base nor touch the bu ons to prevent the fan
from running and causing danger.
Transportation
Firmly hold the fan stand to avoid it from falling down and causing
personal injury.
Using the Fan
Immediately stop using the fan if it makes unusual sounds,
gives off bad odors, overheats, or rotates irregularly.
Do not lean on or tilt the fan while it is running.
Do not shake the fan's head repeatedly so as to avoid damage to the
internal mechanism.
Charging Base
To avoid any damage to the ba ery, charge the ba ery immediately
by connecting the charging base when it is depleted.
Do not unplug the charging base by directly pulling at the cord or
wiggling it out of the outlet. Instead, pull the plug out itself.
Do not a empt to repair the charging base by yourself if it is
damaged.
If the charging base is damaged or broken, it is must be
replaced by a qualified one purchased from the manufacturer
or a er-sales service department.
2