Duronic APEX Manuel D'utilisation page 8

1. Cranking for power: Unlock the handle, crank it at the speed of 2.5 to 3 circles
per second. The faster you crank, the higher efficiency to charge. (It's better
to crank it for no more than 4 circles per second.)
2. Charged by outside power: Connect with the 5V adapter to charge the
internal battery, and about 6-8 hours later it will be fully charged.
3. Charge for digital devices, mobile phone, etc. Connect this product with other
digital devices via connection cable, unlock the handle, crank it at the speed
of 2.5 to 3 circles per second. Illumination of charging indicator indicates that
charge is working.
4. Reception of radio:
A. Operation of the power switch and volume adjusting: First make sure
the power switch is at "ON" position. Turn the volume knob clockwise to
increase the volume. Contrariwise, turn the volume switch anticlockwise
can decrease the volume gradually, a "crack" sound will be heard to show
power off.
B. Wave band shifting : Push the wave band converting switch to choose
FM, AM.
C. Station Search: Observe the display screen while tuning and select the
radio program you needed. Tune the knob to an optimal position in which
the reception effect is the best.
D. Use of antenna:
a). This product adopts telescoping antenna to receive signal for FM. When
the signal is weak, you can extend the antenna or change the direction of
the antenna to find the optimal position, thus can improve the effect of radio.
Whereas, shrink the antenna when the signal is strong.
b). It adopts built-in magnetic antenna to receive signal for AM. You can
change the position of the product properly when the signal is weak.
Operation Method
8