Cleaning And Maintenance - nedis WIFICI20CGY Guide De Démarrage Rapide

Masquer les pouces

Table Des Matières

Table des Matières

Les langues disponibles

WIFICI20CGY

Indoor IP camera

Description

1. Status indicator

2. Reset button

3. Speaker

4. Memory card slot (microSD)

5. Power input (Micro USB)

Use

1. Download and install the app "Nedis SmartLife" from

Apple App Store or Google Play Store on your mobile

device.

2. Launch the app "Nedis SmartLife".

3. Create a new account or log in to your existing

account.

4. Tap "+" to add the device.

5. Select "Security Camera" from the list of products.

6. Insert the memory card into the memory card slot.

7. Use the USB cable to connect the power adapter to

the device. Insert the mains plug of the power

adapter into the wall socket.

8. If the status indicator does not flash: Press and hold

the reset button for 6 seconds.

If the status indicator flashes: Confirm in the app.

9. Confrm the Wi-Fi network and password.

10. Enter the device name.

Note: The device name will also be used for push

notifications.

11. Place the camera on the desired location or use the

included mount (and adhesive pad) to attach it.

Safety

•

To reduce risk of electric shock, this product should

only be opened by an authorized technician when

service is required.

•

Disconnect the product from the mains and other

equipment if a problem should occur.

•

Read the manual carefully before use. Keep the

manual for future reference.

•

Only use the device for its intended purposes. Do not

use the device for other purposes than described in

the manual.

•

Do not use the device if any part is damaged or

defective. If the device is damaged or defective,

replace the device immediately.

•

The device is suitable for indoor use only. Do not use

the device outdoors.

•

Do not expose the product to water or moisture.