Drain Connection - FanWorld FW8-09-BC Manuel D'installation Et L'utilisauter

The unit is capable of removing condensate itself, so it is not necessary to connect the drain,
however, if using the dehumidification mode or high humidity in the environment, it is recommended
to connect the equipment a drain of the opposite when the condensate tank is full the unit will stop
and shows "W.F".

Drain connection:

Remove the cap from the drain outlet (gravity) on the back. Anchor the hose
emptying the hole. Place the other end of the hose into the drain hose have
negative inclination.
Continous
drain outlet
"W.F".
Note:
Make sure the hose is secure and there are no leaks. Direct the
hose toward the drain , making sure that there are no kinks that
will stop the water flowing. Place the end of the hose into the
drain and make sure the end of the hose is down to let the water
flow smoothly. Do never let it up.
29
Drain outlet