Uline H-10741 Mode D'emploi

H-10741
DRUM BOGIE
TOOL NEEDED
13 mm Wrench
Drum Bogie x 1
1. Turn drum bogie upside down.
2. Align caster with mounting holes on bottom
of bogie and attach using included screws.
(See Figure 1)
3. Tighten screws with 13 mm wrench.
4. Repeat steps 2-3 for remaining casters.
PAGE 1 OF 3
1-800-295-5510
uline.com
PARTS
Handle x 1 Swivel Caster x 3
ASSEMBLY
Figure 1
Locking Swivel Caster x 2
5. Place bogie upright and lay handle next to bogie
with tongue facing upward. (See Figure 2)
6. Slide handle in and up to connect into bogie.
(See Figure 2)
Figure 2
7. Keep handle upright when not in use.
Para Español, vea página 2.
Pour le français, consulter les page 3.
Screw x 20
Tongue
1222 IH-10741