Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
40001926.qxd
06/09/2004
Condenser
14
12:14
Page 14
Important: Always switch off and remove the
plug from the electricity supply before cleaning
the condenser.
To maintain the efficiency of the dryer regularly
check that the condenser is clean.
To remove the
condenser
1.
Remove the kickplate (see page 13).
2.
Turn the two locking levers anti-clockwise
and pull out the condenser.
3.
Pull out the condenser unit.
4.
Gently remove any dust or fluff with a cloth,
then wash the unit by holding it under a
running tap turning it so that water flows
between the plates, to remove any dust or
fluff.
5.
Refit the condenser ensuring it is in the
correct way (as indicated by the arrow) and
pushed firmly into place. Lock the two levers
by turning them clockwise.
6.
Refit the kickplate.
Publicité
