Publicité
LOADING & UNLOADING (
LOADING & UNLOADING YOUR KAYAK CONT.
Raising, L
6). With the kayak now loaded into the carriers, remove the TelosXL
TM
assembly from the vehicle and dress the straps as defined in your
carriers instructions.
1). To lower the kayak, unbuckle the straps and install both TelosXL
TM
assembles as described in the beginning steps.
Raise both cradles to the top position and carefully push up and pull
out the kayak so it slides down the loading ramp of the carrier and
into the TelosXL
cradles.
TM
2). Grip the lower section of one cradle and gently apply upward
pressure. With the other hand, pull the locking pin out and slowly
lower the kayak 6"to 8".
Release the locking pin to stop downward travel.
Repeat process for other cradle. Continue to lower the kayak in this
manner until the cradles reach the bottom.
3). Remove the kayak from the Telso
cradles
TM
Remove the TelosXL
assemblies and store away.
TM
Remove all load straps.
Store in
Compress size & Store in the vehicle when not in use.
Publicité
