Oregon PH600 Mode D'emploi page 9

All manuals and user guides at all-guides.com
• Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to
control
• Use the power tool, accessories, and
tool bits, etc. in accordance with these
instructions, taking into account the working
conditions and the work to be performed.
Use of the power tool for operations different
from those intended could result in a hazardous
situation
Battery Tool Use and Care
• Recharge only with the charger specified by
the manufacturer. A charger that is suitable for
one type of battery pack may create a risk of fire
when used with another battery pack
• Use power tools only with specifically
designated battery packs. Use of any other
battery packs may create a risk of injury and fire
• When battery pack is not in use, keep it
away from other metal objects, like paper
clips, coins, keys, nails, screws, or other
small metal objects, that can make a
connection from one terminal to another.
Shorting the battery terminals together may
cause burns or a fire
• Under abusive conditions, liquid may be
ejected from the battery; avoid contact.
If contact accidentally occurs, flush with
water. If liquid contacts eyes, additionally
seek medical help. Liquid ejected from the
battery may cause irritation or burns
Service
Have your power tool serviced by a
qualified repair person using only identical
replacement parts. This will ensure that the
safety of the power tool is maintained Attempting
to perform service or maintenance outside of
the scope of this manual or failure to perform
recommended inspection and cleaning may cause
denial of warranty claims
Multi-attachment Powerhead
Important Safety Instructions
Battery and Charger
• Use only the Oregon B Series batteries.
• Ensure the switch is in the off position
before inserting battery pack. Inserting the
battery pack into machines that have the switch
on invites accidents
• Do not charge battery in rain or in wet
locations.
• Keep the battery charger away from rain or
moisture. Penetration of water in the battery
charger increases the risk of an electric shock
• Recharge battery only with the charger
specified by the manufacturer (Oregon C
Series chargers). A charger that is suitable for
one type of battery pack may create a risk of fire
when used with another battery pack
• Do not dispose of the battery in a fire. The
cell may explode. Check with local codes for
possible special disposal instructions
• Do not charge other batteries on the charger.
The battery charger is suitable only for charging
manufacturer specific and approved lithium
ion batteries within the listed voltage range
Otherwise there is danger of fire and explosion
• Keep the battery charger clean.
Contamination can lead to danger of an
electric shock.
• Before each use, check the battery charger,
cable, and plug. If damage is detected, do
not use the battery charger. Never open
the battery charger yourself. Have repairs
performed only by a qualified technician and
only using original spare parts. Damaged
battery chargers, cables, and plugs increase the
risk of an electric shock
• Do not operate the battery charger on easily
inflammable surfaces (e.g., paper, textiles,
etc.) or surroundings. The heating of the
battery charger during the charging process can
pose a fire hazard
• Use only appropriate battery packs
intended specifically by the manufacturer
for the machine. Use only the Oregon B Series
batteries Use of any other battery packs may
create a risk of injury and fire
9