Télécharger Imprimer la page

Adler AD 7961 Mode D'emploi page 4

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 7
21.Never use the device in high humidity rooms – bathroom, shower room, swimming
pools etc. The humidity can cause short circuit, and effect in damaging the device.
22.The operating device needs to be under supervision and in sight all the time. If you
are leaving the room with the fan heater, always turn the fan heater off. If the fan heater is
not used, the power plug has to be removed from the power outlet.
23.Do not connect the device to the automatic switching device, for example
temperature controlling device or time switch.
24.Flammable materials, for example furniture, bedclothes, paper, clothes, curtains should
be kept at least one meter from the fan heater.
25.Use only original accessories, filters, and spare parts.
DESCRIPTION OF THE DEVICE
Figure 1
A) Air inlet
E) Photocatalytic filter
B) HEPA Filter
F) Control panel
C) Metal shield
G) Air outet
D) UV Lamp
Figure 2
A) Blowing speed Light sensor
B) UV mode
C) ON/OFF switch
D) Reset
USING THE DEVICE
1. Install the filters according to figure 1
2. Insert the plug into the contact.
3. Turn on the device by pressing (2-C).
4. Turn on the button (2-C) again to change blowing speed.
5. Button (2-B) tun on UV mode.
Reset (2-D)
The RESET function reminds the user to replace the filter. Filters must be replaced after light indicator lighted
After replace the filters (fig 3) hold the button (2-B) for about 3 seconds.
WARNING
Do not press the RESET button without the lighted light This will clear the working time and delay the filter replacement information, which
can lead to ineffective operation or damage to the device.
CLEANING AND MAINTENANCE
1. Make sure the fan heater is not hot.
2. Before cleaning the device remove the plug from the electrical socket.
3. Keep the air inlet and outlet openings clean. Do not allow dust to collect on the openings.
4. Clean the housing using only dry or moist cloth.
5. Do not immerse the device in water!
TECHNICAL DATA
Voltage: 220-240V ~50Hz
Power: 45W
wheight 5,2kg
dimensions:275x183x288,5
Noise level 35-61dB
Maximum room volume 20m
Efficiency 145m3/h
To protect your environment: please separate carton boxes and plastic bags and dispose them in corresponding waste bins. Used appliance should
be delivered to the dedicated collecting points due to hazarsous components, which may effect the environment. Do not dispose this appliance in the
common waste bin.
All manuals and user guides at all-guides.com
4

Publicité

loading