Breville the Peel & Dice Manuel D'instructions page 6

Assembly
Before using your food processor for the
first time, remove any packaging material
and promotional labels. Ensure the POWER
button is OFF and the food processor is
unplugged.
Position the Processing Bowl onto the Motor
Base and turn the bowl clockwise until the
handle locks to the front.
Before placing the lid onto the Processing
Bowl, choose your spindle and position
it over the coupling in the center of the
Processing Bowl.
PEELER DISC
The Disc Spindle which comes with your
BFP800 Food Processor is required to
use with the Peeler Disc. Position the Disc
Spindle over the coupling in the center of
the Processing Bowl. Then position the
Peeler Disc over the spindle.
The Peeler disc can be used with your
BFP800 Food Processor bowl and your
BFP006 Peel & Dice Food Processor Bowl.
All Attachments of the BFP800 Sous Chef
Food Processor can be used in your BFP006
Peel & Dice Food Processor Bowl.
Peeler Disc
6
All manuals and user guides at all-guides.com
DICING KIT
The Geared Spindle and the Peel & Dice
Food Processor Bowl are required to use
with the Dicing Kit. Both come with your
Peel & Dice Accessory Kit. Position the
Geared Spindle over the coupling in the
center of the Processing Bowl.
Do not touch the Blades
of the Dicing Grid.
They are extremely sharp.
If you intend to dice larger quantities
(more than 5 cups) please insert the Dicing
Distributor after placing your geared spindle
into the bowl. The Dicing Distributor will
help to distribute diced food evenly across
the bowl.
Place the Dicing Grid, ensuring to align with
the 4 tabs in the bowl, then insert the Dicing
Disc.
Do not use your Dicing Kit with the Disc
Spindle or your BFP800 Food Processor
Bowl. Always use the Geared Spindle and
your BFP006 Peel & Dice Food Processor
Bowl. Failing to use the correct spindle and
bowl will damage the parts.
LID
Place lid onto the processing bowl so that
Disc Spindle
the ALIGN | LOCK graphics on the lid and
handle align. To LOCK the lid, hold the
chute and turn clockwise so that the handle
parts align. Locking the lid correctly will
engage the interlocking safety catch on the
handle, and allow the motor to run.
WARNING
65A
IMPORTANT