Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
Contents
• Package contents
• Placement
• Connecting the loudspeaker system
• Operation and sound settings
• Settings with Windows XP
• Settings with Windows Vista
• FAQ
• Safety notes
• Specifi cations
Package contents
• 1 x Subwoofer
• 2 x Satellites
• 1 x connecting cable
While you are unpacking, ensure that all components are
included and that there is no visible damage (crimped
cables, damaged insulation, etc.)
We recommend that you keep the packaging, including
the Styrofoam inserts, for transport at a later time.
Placement
1. Place the satellite speakers to the left and right of the
monitor and position them so that they face toward
you.
2. The distance between each of the two speakers and
your head should be as equal as possible.
3. You can place the subwoofer underneath your desk.
Because the human ear cannot localise low tones, the
exact position of the subwoofer is not very important.
00057106bda.indd Abs3:9
00057106bda.indd Abs3:9
Connecting the loudspeaker system
Connect the green jack plug of the connecting cable to
the loudspeaker output socket on your sound card and
the other jack plug to the audio input on the subwoofer.
Connect the black-white cable of the satellites to the
black terminal and the white cable to the red terminal on
the subwoofer.
Plug the mains plug into an empty socket.
Carefully read through the safety notes before using the
device for the fi rst time.
Operation and sound settings
Switching the loudspeakers on
Use the on/off switch on the subwoofer to switch the
loudspeaker system on and off.
Volume
You can control the volume with the control on the
subwoofer.
Sound settings
In addition to the volume control, the subwoofer also
has a control for low frequencies (bass). First, set the
loudspeakers to normal room volume and then adjust the
bass to the levels you desire.
9
20.02.2008 14:12:31 Uhr
20.02.2008 14:12:31 Uhr
Publicité
