Drift Innovation Ghost 4K Manuel D'instructions page 22

All manuals and user guides at all-guides.com
17
WARNING
Failure to follow these safety instructions
could result in fire, electric shock or
other injury or damage to the LCD
Module, Ghost 4K camera or other
property.
HANDLING
The LCD Module contains sensitive
components. Do not drop, disassemble,
open, crush, bend, deform, puncture,
shred, microwave, incinerate or paint
the LCD Module. Do not insert foreign
objects into the port opening on the LCD
Module. Do not use the LCD Module if
it has been damaged—for example, if
cracked, punctured or harmed by water.
The LCD Module screen is made of glass.
Glass may break if dropped or receives
a substantial impact, or is crushed, bent
or deformed. If glass chips or cracks, do
not touch or attempt to remove broken
glass. Glass cracked due to misuse or
abuse is not covered.
Disclosures
KEEPING THE LCD SCREEN CLEAN
Clean the LCD screen immediately if it
comes in contact with any contaminant
that may cause staining, such as ink, dye,
makeup, dirt, food, oil or lotion. To clean
the LCD screen, use a soft, slightly damp,
lint-free cloth. Do not allow moisture to
enter port openings. Do not use window
cleaners, household cleaners, aerosol
sprays, solvents, alcohol, ammonia or
abrasives to clean the LCD Module.
AVOID WATER AND WET LOCATIONS
Do not use the LCD Module in rain or
near washbasins or other wet locations
without protecting it. Do not spill food or
liquid onto the LCD Module. If the LCD
Module gets wet, turn off the camera
and disconnect
the screen before cleaning. Allow the
screen to dry thoroughly before using
it again. Do not dry the LCD Module
with an external heat source such as a
microwave oven or hair dryer. Damage to
the LCD Module caused by contact with
liquid is not covered under the warranty.