Publicité
Les langues disponibles
Les langues disponibles
GB Manual FA922IP
Thank you for your purchase of the network camera. We recommend that you
carefully read this manual before use in order to use your camera as quickly and
easily as possible. You can find the illustrations from this manual prior to this
chapter.
1.
Preventive measures and safety instructions
1.1. Safety symbols used
Warning! A warning indicates the risk of (serious) damage to the user or the
product if the user does not carry out the procedures with care. Note! A
comment makes the user aware of possible problems. Tip: A tip makes the user
aware of convenient functions and additional options.
1.1.1. Notifications
Warning! Do not install the product outdoors or in any place where it might
become wet. Warning! Do not install the product in any place that might be
exposed to extreme heat or cold. Warning! Before beginning assembly, check to
make sure there are no electrical wires or water pipes running through the wall
where you want to drill. Warning! By removing the plug from the power outlet,
you immediately cut off power to the product; then contact the Smartwares
service desk when:
-
the product's hardware components are open, drilled through,
damp or have suffered a hard fall;
-
the adapter's power cable is frayed or open, so that the metal
is showing;
-
the adapter housing is damaged;
-
the adapter has come in contact with moisture or liquid;
-
the glass of the camera is cracked or broken;
Warning! It is not permitted to open the product yourself or to have it opened,
neither is it permitted to repair the product yourself or to have it repaired. This
will void the warranties. Please let any maintenance be carried out by certified
maintenance personnel. Warning! Only use original accessories from the
manufacturer. Warning! Keep the product out of reach of children. Warning!
Disconnect the device from all power sources before cleaning it. Warning! Use a
clean, dry cloth to clean the product. Warning! Do not use any abrasive agents,
corrosive cleaning products or any substances that contain bleach or solvents to
clean the product. Warning! Remove the adapter from the power outlet during
storms, lightning and whenever the product will not be used for a longer period of
time.
Please note! Install the product as indicated in this manual. If in doubt, consult
a recognised technician and always take account of local installation codes and
regulations. Please note! The camera should be kept out of direct sunlight.
Please note! Do not point the camera at bushes, tree branches or other moving
objects. Please note! The product must not be discarded as unsorted municipal
waste, it must be disposed of separately.
2.
Intended use
The camera is a security camera that makes it possible to view surveillance
images via a local network, an Internet connection or the Flamingo
"Plug2View(iOS) & p2pcamviewer(Android)" App on your smartphone. The
camera can be connected through an Ethernet cable. The camera can make
video and audio recordings. The camera is also outfitted with motion detection
and can switch on and off via an I/O port.
3.
Technical specifications
3.1. General product specifications
Image sensor
: 1/4" Color CMOS Sensor
Minimum Illumination : 0.5Lux
video compression
: H.264 720p Single Stream
Video Frame Rate
: 25fps , 30fps
IR-cut
: Included
Motion detection
: Yes
Capture
: Yes
Video adjust
: Brightness, contrast, sharpness, saturation
System interface
: 10Base-T/100Base-TX internet interface
Video stream
: 16Kbps~4Mbps
Protocol
: TCP/IP
Night vision
: 10 meters
Power DC
: 12V/1A external power adaptor
Comsumption
: 4W
Temperature
: -5~55°C
Support viewing
: Windows XP/Vista/7/8/iOS/Android
* The specifications are subject to change without notice
3.2. Main component parts
1.
Camera with base
2.
Ethernet cable
3.
DC supply
3.3. Connections
1.
Ethernet port
2.
DC connection
3.
Reset
4.
Camera installation
4.1. Connecting the camera
-
Connect the adapter cable to the DC connection of the camera. Then
insert the adapter plug into the power outlet.
-
Connect the included ethernet cable to the network port of the
camera. Connect the other end of the ethernet cable to your router.
The green LED on the ethernet port will light up when the camera is
connected to the network. The LED on the front of the camera will
also begin flashing. You can now operate your IP Camera using your
smartphone or PC. Go to section 4.2 for use with smartphone and go
to section 4.3 for installation on your PC.
4.2. Settings for smartphone use
Attention!
To
use
the
Flamingo
"Plug2View(iOS)
(Android)"App, you need a smartphone with internet access. Attention! To scan
a QR code, you need an APP that can scan barcodes. To set up your camera using
Android, go to section 4.2.1. To set up your camera using iOS, go to section
4.2.2.
4.2.1. Android
-
Download the App: "p2pcamviewer" via Google Play and install it.
-
Start the App.
The "Login" screen of the App shows A . Here you can log in to the App, you can
register an account and you can download a QR code scanner.
Registering an account
-
Click on "Register", the screen "Register" shows B.
-
Enter your username at "User name".
-
Enter your password at "Password".
-
Enter your password once again at "confirm password".
-
Enter your email address at "e-Mail".
-
Click on "OK". When the registration is successful, a message
"Register success" is displayed.
-
Click on "Cancel" to return to the "Login" screen.
Downloading the QR code scanner
-
Click on "QRCode", the screen "Tips" shows C .
-
Click on "OK" and carry out the associated following steps.
Login to the App
-
Input the camera code at "Enter Device ID" and the
camerapassword at "Enter Access Password". You can find both
codes on the back of the camera.
-
If you want the App to remember your password, click on the box
next to "Password".
-
Click on the "Login" button. The screen "Device list" shows D. Here
you can see if the camera is connected (ONLINE) or if it is not
connected (OFFLINE). Your camera has been added to your phone and will
appear on the start screen of your App.
All manuals and user guides at all-guides.com
4.2.2. iOS
-
Download the App: "Plug2View" from the App Store and install it.
-
Start the App.
The "Login" screen of the App shows E . Here you can log in to the App, you can
register an account and you can download a QR code scanner.
Registering an account
-
Click on "Register", the screen "Register Account" shows F .
-
Enter your username at "Username".
-
Enter your password at "Password".
-
Enter your password once again at "Please enter again".
-
Enter your email address at "Email".
-
Click on "Done". When the registration is successful, a message
"Register success" is displayed.
-
Click on "OK" and then "Login" to return to the "Login" screen.
Scanning QR Code
-
Click on "Scan QR Code" and then scan a QR code. This must entirely
fit within the white square.
-
Press "Cancel" to go back again without scanning.
Login to the App
-
Input the camera code at "Username" and the camerapassword at
"Password". You can find both codes on the back of the camera.
-
If you want the App to remember your password, move the box
behind "Remember Password" to the right so that "I" is visible.
-
Click on the "Login" button. The screen "Remote Device" shows G.
Here you can see if the camera is connected (ONLINE) or if it is not
connected (OFFLINE). Your camera has been added to your phone
and will appear on the start screen of your App.
4.2.3. General
-
For instructions on placing your camera go to section 4.7.
-
For instructions on using your camera with the App go to chapter 5.
4.3. Install your camera on your PC
-
Insert the included CD-ROM into your computer.
-
Launch "SYSM Monitor.exe" from the CD-ROM.
-
To run through the installation, click on "Next" three times.
-
Complete the installation by clicking on "Restart computer".
The IP camera tool is now installed on your computer. You will find the shortcut on
your desktop. Please note! Do not remove this shortcut! You will have to re-
install the IP camera tool if you do.
4.4. Linking to your camera
-
Start the IP Camera Tool via the "SYSM Monitor" shortcut on your
desktop. The IP camera tool automatically searches for the IP
camera(s) connected to your network. Attention! All your IP
cameras are displayed in the LAN window H2. If no cameras are
visible, perform the following operation:
*
Right mouse click in the LAN window.
*
Left mouse click on "Refresh" to refresh the list.
*
Double-click the camera which you want to use. The main window
H1 displays the camera image. You can manage your camera and
camera settings via this screen and control panel at the bottom right
H3 (see chapter 6).
4.5. Connecting you camera from a remote computer
-
Start the IP Camera Tool via the "SYSM Monitor" shortcut on your
desktop. The IP camera tool automatically searches for theIP
camera(s) connected to your network. If you want to watch your
camera from a remote computer that is not connected to the camera
via LAN, perform the following steps:
*
Input the camera code at "User name" and the camera password at
"Password". You can find both codes on the back of the camera.
*
If you want the App to remember your password, click on the box
next to "Save Password".
*
Press the "Login" button. Camera is shown in the WAN window I .
*
Double-click the camera which you want to use. The main window
H1 displays the camera image. You can manage your camera and
camera settings via this screen and control panel at the bottom right
H3 (see chapter 6).
4.6. Camera installation
Please note! Make sure that the camera functions properly in the chosen location
before starting installation.
5.
Managing your camera using your smartphone
Make sure your camera(s) is/are connected to your smartphone via the Flamingo
"Plug to view" App (see section 4.1 and 4.2).
5.1. Viewing your camera image on your Android smartphone
The home screen of the App consists of the following tabs D:
WAN (D1)
: here you can see all the available cameras.
File (D3)
: all "screencaptures" / photos and videos are saved here.
Event (D4) : here you can see when your camera has been online and
offline and here you can find alarm reports when
movement has been detected.
More (D5)
: here you can share files with friends, update the app, learn
more about the app, motion detection and / or switch the
Offline Push on or off, and view information about the
storage space on your smartphone.
On the WAN tab click on the camera you want to manage. The camera image
appears on your smartphone J. Attention! If you do not have a picture it is
possible that your wireless connection is not fast enough. In that case change the
resolution of your camera image (see section 5.1.1). The camera screen
provides a number of options:
-
Click the listen / speak J1 button, in the camera image headphones
and a microphone appear.
&
p2pcamviewer
-
Click on the headphones K to listen to the sound that the camera is
recording.
-
Click on the microphone L to speak using the speaker of the camera.
-
Click on the headphones or microphone again to switch off the
aforementioned function(s).
-
Click on the Snapshot button J2 to take a picture of
your camera image
-
Press the Video button J3 to start recording a video, press the video
button again to end the video recording.
-
Click on the PTZ button M to use the control panel. Here you can
mirror the image, you can zoom in and out and refresh the camera
image.
5.1.1. Changing the settings of your camera
on your Android smartphone
-
On the WAN tab, click on the arrow button next to the camera that
you want to manage. The "Setting" screen appears N .
-
Click on "Video setting", the Video Setting screen appears O .
-
Click "Quality" on the grey triangle and then press the desired
setting. LOW is low quality, EXCELLENT is very high image quality.
With CUSTOM you can enter values for the camera yourself.
5.2. Viewing your camera image on your iPhone
The home screen of the App consists of the following tabs G:
Remote (G1)
: here you can see all the available cameras.
File (G3)
: here all "screencaptures" / photos and videos are saved.
Here, the saved files can be sent via email and / or can
be removed. To do so, click on the "Edit" button.
About (G4)
: here you can view more information about the App.
-
On the Remote Device page tab, click on camera you want to
manage. The camera picture appears on your smartphone P.
Attention! If you do not have a picture it is possible that your
wireless connection is not fast enough.
In that case change the resolution of your camera image (see section 5.1.1)
The camera screen provides a number of options:
-
Click the listen / speak P1 button, in the camera image headphones
and a microphone appear.
-
Click on the headphones to listen to the sound that the camera is
recording.
-
Click on the microphone to speak using the speaker of the camera.
-
Click on the headphones or microphone again to switch off the
afore mentioned function(s).
-
Click on the Snapshot button P2 to take a picture of your camera
image
-
Press the Video button P3 to start recording a video, press the video
button again to end the video recording.
-
Click on the PTZ button P4 to use the control panel. Here you can
mirror the image, you can zoom in and out and refresh the camera
image.
5.2.1. Changing the settings of your camera on your iPhone
-
On the Remote Device page tab, click on the "Options" button G5 .
The "Setting the device" screen appears Q.
-
Click on "Video parameter setting", the Video Setting parameter
screen appears O .
-
Click "Quality" on the grey triangle and then press the desired
setting. LOW is low quality, EXCELLENT is very high image quality.
With CUSTOM you can enter values for the camera yourself.
6.
Managing your camera using your PC
-
Start the IP Camera Tool via the "SYSM Monitor" shortcut on your
desktop. The IP camera tool automatically searches for the IP
camera(s) connected to your network.
-
Double-click the camera you want to use. In the main window H1
the camera image appears and the control panel is found on bottom
right H3 .
6.1. Watching your camera images via the PC
When you have camera image in the main window, you can change and set up
the aforementioned using the control panel. The control panel contains the
following buttons:
Refresh
: by pressing this button the camera image is refreshed.
Zoom in
: by pressing this button the camera zooms in.
Zoom out
: by pressing this button the camera zooms out.
Capture
: by pressing this button, you can take a picture of the
camera image.
Record
: Press this button to start recording a video, press the
button again to stop the video recording.
Listen
: by pressing this button you can listen to the sound that the
camera is recording.
Talk
: by pressing this button you can talk through the speaker of
the camera.
Vertical flip : by pressing this button, you can flip the image horizontally.
Mirror
: by pressing this button, you can flip the image vertically.
Settings
: by pressing this button, you can control the settings of the
camera.
6.2. Managing your camera's settings
-
Press the "Settings" button, the "Device Properties" screen
appears. Here you can set the settings for the colours and the
resolution.
-
When you have set the desired settings, click "Apply" to save the
settings and then click on "Close" to return to the start window.
GB PRODUCT GUARANTEE
This product has factory warranty according to EU regulations. Guarantee lasts
for the number of years shown on the packaging, starting from the date of
purchase. Keep the receipt - proof of purchase is required in order to rely on
guarantee. In the case of problems, please contact with the store where you
purchased the product. For further product information call to our Hotline or
visit our website: www.smartwares.eu . You can also register your product
there.
DISPOSAL
Correct Disposal of This Product (Waste Electrical & Electronic
Equipment) (Applicable in the European Union and other European
countries with separate collection systems)
This marking shown on the product or its literature, indicates
that it should not be disposed with other household wastes at the
end of its working life. To prevent possible harm to the
environment or human health from uncontrolled waste disposal,
please separate this from other types of wastes and recycle it
responsibly
to
promote
the
sustainable
resources.Household users should contact either the retailer where they
purchased this product, or their local government office, for details of where
and how they can take this item for environmentally safe recycling. Business
users should contact their supplier and check the terms and conditions of the
purchase contract. This product should not be mixed with other commercial
wastes for disposal.
* Always throw empty batteries to the battery recycling bin.
* If the battery is built-in inside the product, open the product
and remove the battery.
MAINTENANCE
The devices are maintenance-free, so never open them. The
guarantee becomes void when you open the appliance.Only
clean the outside of the devices with a soft, dry cloth or a
brush. Prior to cleaning, remove the devices from all voltage
sources. Do not use any carboxylic cleaning agents or
petrol, alcohol or similar. These attack the surfaces of the
devices. Besides, the vapors are hazardous to your health and explosive. Do not
use any sharp edged tools, screw drivers, metal brushe or similar for cleaning.
Warning: Protect the battery against fire, too much heat and sunshine
SAFETY
* Make sure that all electric connections and connection cables meet the
pertaining regulations and are in conformity with the operating
instructions.
* Do not overload electrical outlets or extension cords, fire or electric
shocks can be the result
* Please contact an expert in case you have any doubts about the mode
of operation, the safety or connecting the appliances.
* Keep all parts away from young children's reach
* Do not store this item on wet, very cold or warm places, this can
damage the electronic circuit boards.
* Avoid dropping or shocks, this can damage the electronic boards
* Never replace damaged power cables yourself! In such a case, remove
them from the net and take the devices to a workshop.
* Repairs or opening of this item may only be performed by an
authorised workshop.
* Wireless systems are subject to interference from cordless phones,
microwaves, and other wireless devices operating in the 2.4GHz
range. Keep the system AT LEAST 10 ft away from the devices during
installation and operation.
* Do not swallow batteries. Keep batteries out of the reach of children.
reuse
of
material
s
Publicité
