Troubleshooting; Technical Data - CMi C-EMH-2400-40 Notice Originale

All manuals and user guides at all-guides.com
Haecksler_468289.book Seite 31 Donnerstag, 7. April 2016 8:53 08
Disposing of packaging
The packaging consists of cardboard and appropri-
ately marked films, which can be recycled.
– Take these materials to a recycling facility.

Troubleshooting

If something isn't working ...
DANGER! Danger of death! Improper
repairs can result in the product functioning
unsafely. This endangers yourself and your
environment.
Fault/malfunction
Motor not running.
Material to be chipped is not pulled
in.
If you can't fix the fault yourself, contact your nearest
vendor. Please be aware that any improper repairs
will also invalidate the warranty and additional costs
may be incurred.

Technical data

Rated voltage
Rated output
Protection class
Degree of protection
Idling speed
Max. branch width
Sound pressure level (L )*
PA
Guaranteed sound power lev-
el (L )*
WA
*) The stated values are emission values and do not necessarily
represent safe workplace values. Although there is a correlation
between emission and immission levels, it is not possible to
reliably derive whether additional precautions are necessary or
not. Factors influencing the immission level currently prevailing
at the workplace include the nature of the workroom, other
noise sources, e.g. the number of products and other work pro-
cesses. Admissible workplace values can also vary from coun-
try to country. However, this information should enable the user
to better assess danger and risk.
Note: The product is intended for use only
in properties having a mains current carry-
ing capacity of ≥100 A per phase and being
supplied by a distribution network with a
mains voltage of 400/230 V. If required,
contact the electricity company to ensure
that the mains current carrying capacity at
the connection point to the public power
grid is adequate for connecting the prod-
uct.
Malfunctions are often caused by minor faults. You
can easily remedy most of these yourself. Please
consult the following table before contacting the
vendor. You will save yourself a lot of trouble and
possibly money too.
Cause
No mains voltage?
Cable faulty?
Was the motor protection triggered? Remove all chipped pieces and
Was the safety switch not trig-
gered?
Material blockage?
Are the blades blocked?
Are the blades worn?
220–240 V~, 50 Hz
S6= (40%) 2400 W
II
IP24
-1
3940 min
40 mm
98 dB(A)
(K = 3 dB(A))
107 dB(A)
(K = 1 dB(A))
GB
Remedy
Check cable, plug, socket and fuse.
Contact a professional
press reset button.
Check the connection hopper-mo-
tor housing.
Remove all chipped pieces from the
blades.
Remove all chipped pieces and
press reset button
Replace the blades if necessary.
31