TFA LUMATIC FREE 43.2039 Mode D'emploi page 10

TFA_No. 43.2039_Anl_02_23
LED-headlamp
• The charging symbol lights up red.
• You can select your respective light setting by
pressing the ON/OFF button. The sequence is
shown as follows:
– COB diffused light (frontal) high
– COB diffused light (frontal) low
– COB diffused light (frontal) red
– LED focused light (lateral) high
– LED focused light (lateral) low
• Press the button again and the light turns off.
• For flashing light press and hold the ON/OFF but-
ton.
• The elastic head strap can be adjusted.
8. Motion sensor mode
• Select your respective light setting by pressing
the ON/OFF button.
• Press the motion sensor ON/OFF button. The
charging symbol lights up orange/green. The
motion sensor is activated.
• If the motion sensor detects a movement about
5 cm in front of the sensor, the light will turn on
and off automatically.
• To deactivate the function, press the motion sen-
sor ON/OFF button again. The charging symbol
shines red again.
08.02.2023
– 18 –
13:26 Uhr Seite 10
LED-headlamp
9. Troubleshooting
Problem
No light
If your device fails to work despite these measures,
please contact the retailer where you purchased the
product from for advice.
10. Waste disposal
This product and its packaging have been manufac-
tured using high-grade materials and components
which can be recycled and reused. This reduces
waste and protects the environment.
Dispose of the packaging in an environmentally
friendly manner using the collection systems that
have been set up.
Disposal of the electrical device
Caution! This device contains a built-in
battery that cannot be removed without
damaging the housing.
Solution
➜ Press the ON/OFF button
to switch on the device
➜ Charge the battery via
USB
➜ When the motion sensor
is activated: Move your
hand approx. 5 cm in
front of the sensor
– 19 –