HAMPTON BAY BPT12-13D Guide D'utilisation Et D'entretien page 10

Care & Cleaning
□ Before servicing or cleaning unit, disconnect the
power supply at the panel and lock to prevent the
power from being turned on. If the panel cannot be
locked, clearly mark the panel with a warning tag
to prevent the power from being turned on.
□ Remove grill by squeezing springs and pulling
down.
□ Wash and clean the grill in a sink and dry with a
cloth.
□ Remove dust and dirt from the fan housing with a
vacuum cleaner.
□ Dampen cloth with dish detergent, wipe the fan
housing and dry with a cloth.
□ Replace the grill.
Specifications
Model No.
Air direction
Voltage
Hertz
Duct diameter
Noise
Power consumption (Watts)
Speed
Air deliver at 0.1" WG
Weight
DIMENSIONS
Ceiling opening - length
Ceiling opening - width
Ceiling opening - depth
Housing dimension - length
Housing dimension - width
Housing dimension - depth
All manuals and user guides at all-guides.com
BPT12-13D
70 cfm
120 V
60 HZ
3 in. (7.62 cm)
4.0 Sone
49 W
1680 rpm
70 cfm
3.2 lbs. (1.45 kg)
7.67 in. (19.48 cm)
7.48 in. (19 cm)
3.94 in. (10.01 cm)
7.48 in. (19 cm)
7.28 in. (18.49 cm)
3.74 in. (9.5 cm)
10
□ To reduce the risk of fire, always vent fans to the
exterior and in compliance with local codes. Do
not vent exhaust air into spaces within walls,
ceilings, attics, crawl spaces, or garages.
□ Unplug or disconnect the appliance from the
power supply before servicing.
CAUTION: Do not use solvents, thinner or harsh
chemicals for cleaning the fan.
CAUTION: Do not allow water to enter the motor.
CAUTION: Do not immerse resin parts in water
over 140 ° F (60° C).
Please contact 1-877-527-0313 for further assistance.
www.hamptonbay.com