Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
TURBO FUnCTIOn
Press this button to obtain a powerful jet of steam, useful to
eliminate creases.
• Set plate temperature to MAx.
• Move the steam regulator to the steam
position.
• Wait for the "steam ready" light G to go off.
• Press and release the Turbo button (L).
To use the turbo function correctly, wait a few seconds between
one burst of steam and the next.
SPRAY BUTTOn
If during ironing, you note particularly resistant creases or if
your garment requires a higher level of dampness, you can use
the spray.
• Fill the tank and set plate temperature as described above.
• Press the spray
spray jet towards the parts of the garment to be dampened.
Never use the spray when ironing silk as the drops of water
could mark the fabric.
nO-dRIP SYSTeM
This iron has a no-drip system which automatically shuts off
steam production when the temperature is set too low.
During operation, the device may emit creaking noises as the
iron heats up and cools down.
This is perfectly normal and part of correct operation.
AUTO-OFF
• If the iron is left unused in a horizontal position for 30
seconds, it goes off automatically.
• If the iron is not used in an upright position, the auto-off
button (e) repeatedly, directing the
11
en
Publicité
