OPERATING INSTRUCTIONS
TEMPERATURE SELECTION
The temperature of the appliance can be adjusted
by turning the thermostat dial on the ceiling of the
cabinet.
• The larger, darker dots indicate the coldest
setting.
• The smaller, lighter dots indicate the warmest
setting.
• The "OFF" position will turn off the cooling
function.
Internal temperature of the appliance can vary
based on ambient temperature, the quantity of items
stored and how frequently the door is opened.
If the temperature control knob adjusts to the maximum setting,the compressor may run continuously.
It's a coldest mode. Please do not adjust to the maximum setting frequently.
LEVELING INSTRUCTIONS
There is an adjustable foot on the bottom of the appliance that can be
turned up or down to ensure that the appliance is level.
1. Turn the leveling foot counter-clockwise until the top of the foot is
touching the bottom of the cabinet.
2. Slowly turn the leveling foot clockwise until the appliance is level.
DOOR REVERSAL INSTRUCTIONS
If the appliance is placed on its back or side for any length of time during this process, it must be allowed
to remain upright for 6 hours before plugging it in to avoid damage to the internal components.
To change the direction of the door swing, follow the instructions below.
1
3
2
4
3
OFF