koctas HJDXK10GT46S Mode D'emploi page 26

Installation
IMPORTANT : Please follow the safety advice set out on pages 3 to 5.
Top left wall bracket
Lower wall bracket
1. At the chosen location, mark the position of the 4 wall brackets on the
wall.
2. Mark the mounting holes (see illustration).
The holes must be aligned on the horizontal and vertical lines. If in doubt,
check it with a spirit level.
3. Drill the 8 mounting holes and insert the wall plugs.
4. Screw the 4 wall brackets securely into the wall (the 2 brackets with locks
are positioned to the top).
5. Assemble and screw the 2 locks into position on the 2 top brackets.
6. Connect the electrical connection (refer to the following paragraph).
7. Hook the appliance onto the 4 brackets.
8. Lock the 2 top brackets by sliding their lock to the stop position towards
the bottom then tightening the lock screw.
Unlocked bracket
Top right wall bracket
Lock
Lower wall bracket
Locked bracket
26